Remote Display Programmer for All i-Series Meters and Controllers

Remote Display/Programmer
Compatible with all iSeries Meters and Controllers

i8/iS8 - 1/8 DIN Meter
i8C/iS8C - 1/8 DIN Ultra Compact Case
i8DV/iS8DV - 1/8 DIN Dual Display Vertical
i8DH/iS8DH - 1/8 DIN Dual Display Horizontal
i16/iS16 - 1/16 DIN Single & Dual Display
i32/iS32 - 1/32 DIN Meter
RD4/RD6 - 1/8 DIN Remote Display/Programmer
iLD - Big Display

iSeries Family - Selection Guide

Specifications:
	1/8 DIN Panel Cutout or Surface Mount
	Big LED's - RD4 is 21 mm (.83") and RD6 is 17.3 mm (.68")
	Alarm Indicators, and Color change
	Serial Input ASCII RS-232, RS-485 Menu selectable
	NEMA-4 (IP65) 1/8 DIN Bezel
	20 mm (0.80") Behind Panel and only 39 mm (1.6") over all

NEWPORT PRODUCT INFO

• MANUAL - PDF
• SPECS - PDF
• MECHANICAL
• PRICE

REQUIRES ADOBE ACROBAT - HELP

REMOTE DISPLAY
The RD4/RD6 are 4 or 6 digit master/slave displays providing remote readout from instruments such as programmable controllers, digital panel meters and other instruments with serial output. Two communication interfaces are supported in remote Display: RS-232 and RS-485 can be programmed through front panel buttons. The RD4/RD6 remote display can be mounted in a 1/8 DIN panel cutout, or surface mounted with the included bale. The RD4 and RD6 features big bright 21mm (.83") and 17.3 mm (.68") 9-segment LED's that can be programmed to change color between Green, Amber and Red to indicate alarms. Serial Connections can be made to an RJ-11 jack or screw terminals. In the Slave mode, the RD4 and RD6 can be used for displaying Alphanumerical characters from a computer. Power is supplied from 10 to 36 Vdc power supply or optional universal (100 - 240 Vac) power adapter.
(Compatible Host device must feature serial RS232 or RS485 output)

Programmable Color Display
The NEWPORT® iSeries are the first complete series of 1/8, 1/16 and 1/32 DIN process control instruments with totally programmable color displays. The display can be programmed to change color at any set point or alarm point.

iSeries Change Color at any Setpoint

For example, the instrument can be programmed to display the process value in GREEN during warm-up, switching to AMBER to signal the normal operating range, and in RED to signal an alarm condition. The changes in color are quickly seen from a distance, and machine operators can intuitively react to changing conditions. The colors can be programmed to change back when the value drops back below the alarm point or to "latch" on until being reset by the operator.

Specifications
Serial: ASCII Interface RS-232/RS-485
Baud rate: 300, 600, 1200, 2400, 4800, 9600, 19200.
Data Formats: 7 data/odd parity/ 1 stop, 7 data/even parity/1 stop, 8 data/no parity/1 stop.
Power Requirements: 10 to 36 Vdc.
Or optional universal power adapter, nominal output: 9Vdc @ 0.5 mA, input: 100-240 Vac, 50/60 Hz

Storage Temperature: -20 to +85 degree C
Relative Humidity: 0 to 85%
Power Consumption: 2 W
Operating Temperature: 0-50 °C
Protection: NEMA-4 (IP65)
Mechanical Dimensions: 3.78" (96 mm) x 1.89" (48 mm) x 1.6 (39 mm)
Panel Cutout: 3.622" (92 mm) x 1.772" (45 mm)
RD4 Display: 4-Digit, 9-segment LED 21 mm (0.83")
RD6 Display: 6-Digit, 9-segment LED 17.3 mm (0.68")

DOWNLOAD CAD FILES - MECHANICAL

DOWNLOAD CAD FILES - WIRING